EuroPro Series cnc High speed hydraulic guillotine shear
Hydraulic Shear Machine

CNC Guillotine Shear Machine(EuroPro Series)

CNC Guillotine Shear Machine(EuroPro Series) is Smart CNC top configuration, with CE standard Machine,with Europe advance design.
INQUIRY
Description Optional
EuroPro Series cnc High speed hydraulic guillotine shear
 
1. The shear velocity of the Quick hydraulic shearing machine is TWICE times of normal shears, greatly improving the efficiency of the shearing machine, but also improving the cut quality of shearing edge, reducing wear of the scissors, increasing the service life of the cutting blade.
2. Welded steel plate construction、hydraulic drive and welded blades frame, with high strength and good rigidity. The power storage device returns steadily and quickly.
3. The blades gap can be adjusted according to the width of work-piece. Upper and bottom blades are all have 4 cutting edges, which can be turned around to use.
4. Shearing compaction device uses independent pressure cylinder which has plastic pad on the bottom to prevent the work-piece from being scratched.
5. Back gauge adopts roll screw and drive without clearance.
Main specification of EuroPro Series cnc High speed hydraulic guillotine shear:
EuroPro
Series
Cutting thickness
(450MPA)
Cutting
length(mm)
Throat
depth(mm)
Back-gauge
stroke(mm)
Shear angel Stoke
(Times/Minutes)
Motor
(kw)
Overall size
L×W×H
(mm)
Weight
(Kgs)
6×3200 6 3200 80 600 0.5°~1°30′ 20-60 15 3850×1840×1995 7000
6×4000 6 4000 80 600 0.5°~1°30′ 16-60 15 4650×1840×2100 9000
6×5000 6 5000 80 600 0.5°~1°30′ 12-40 30 5650×2185×2380 16700
6×6000 6 6000 80 600 0.5°~1°30′ 20-60 15 6650×2260×2380 6300
8×3200 8 3200 80 600 0.5°~2° 18-60 15 3850×1990×2050 7200
8×4000 8 4000 80 600 0.5°~2° 16-60 15 4650×2030×2075 9800
8×6000 8 6000 80 600 0.5°~2° 12-40 37 6805×2115×2715 21500
12×2500 12 2500 80 750 0.5°~3° 16-50 30 3195×2040×2210 9500
12×3200 12 3200 80 750 0.5°~3° 14-50 30 3895×2050×2240 11500
12×4000 12 4000 80 750 0.5°~2° 12-50 30 4710×2110×2485 14500
12×6000 12 6000 80 750 0.5°~2°30′ 10-30 60 7150×2300×3100 30500
16×2500 16 2500 80 750 0.5°~2°30′ 14-40 37 3215×1970×2340 9800
16×3200 16 3200 80 750 0.5°~2°30′ 12-40 37 3915×1970×2455 12500
16×4000 16 4000 80 750 0.5°~2°30′ 10-40 37 4715×2010×2590 17000

Anti-twist device when cut narrow plate

During the cutting process, internal stresses tend to twist the material. Especially when width is reduced with respect to thickness, the strip will tend to curl.
 
Anti-twist system contrasts the piece warping by pushing it against the upper blade.
 
The unique Anti-Twist system consists of a series of hydraulic cylinders placed below the lower blade, which support the sheet metal against the upper blade.
 
The cylinders exert a counter-pressure in proportion to the thickness, thus compensating the twist effect of the sheet.
 
This opposing action allows us to prevent the twisting effects, which depend on the geometry and the characteristics of the material and the cutting parameters.
 
The Continuous Anti-twist version distributes the force more evenly. It serves to reduce the possibility of damage to the surface of thin metal sheets, or in case of delicate finishes such as polished stainless steel or pre-painted plates.
 
     Name Introduction Reference Pictures
ESTUN E21S NC Types, ESTUN,China(standard)  
ESTUN E210S CNC Types, Back-gauge, shear angel,
clearance adjust and cutting stroke
 
Holland DELEM
DAC360
CNC Types, Back-gauge, shear angel,
clearance adjust and cutting stroke
 
Germany ELGO P40 CNC Types, Back-gauge, shear angel,
clearance adjust and cutting stroke
 
Safety light curtain OMRON,Japan
LNTECH,China
 
Oil Cooling Decrease the hydraulic oil degree,
working long time
 
Pneumatic rear
supporter
The pneumatic rear supporter is
featured to process
long and thin plates to
improve the accuracy
and reduce workload on machine
 
Special length
of front beam
For support long plate  
Angle protractor
positioning device
Position plate when cut different angle  
Special length back safety. Special CE standard  
Automatic loading Automatic loading plate  
CNC Control front
feeding shear machine
Automatic push the plate
cutting and positioning